LaCie 1big Dock SSD Pro User Manual
LaCie 1big Dock SSD Pro User Manual

Was this content helpful?

Expansion Port

DisplayPort 1.4

DisplayPort is a digital display interface used to connect a video source to a display device (for example, a computer monitor) as well as other forms of digital data. DP 1.4 supports up to two 4K displays or one 5K display.

 LaCie 1big Dock SSD Pro provides the full performance available to DisplayPort 1.4. However, many computers with Thunderbolt ports do not support DisplayPort 1.4, which limits the outputs to displays. In addition, some displays do not accept the full bandwidth available to DisplayPort 1.4. Check the documentation for your computers and displays for DisplayPort 1.4 compatibility.
 DisplayPort may be compatible with some HDMI, DVI, and VGA adapters (not included). Note that these have not been tested.

Connecting the DisplayPort

  1. Insert the DP 1.4 end of the cable or adapter into the port on the back of the 1big Dock until it clicks into place. The cable/adapter is now locked into the DP 1.4 port.
  2. Connect the other end of the cable to your configured audio/video display.

Disconnecting the DisplayPort

  1. Grasp the DP 1.4 end of the cable or adapter that’s connected to 1big Dock.
  2. Hold down the release tab with your thumb, and then pull back to remove the cable from the port.