Twitter Facebook Google Plus Linked in

This article is for informational purposes only and no longer being updated by Seagate.

Reset procedure for the Network Space

Reset procedure for the Network Space

Follow the procedure below to reset the Network Space to factory defaults:

  1. Move the power switch to the OFF position. Wait for the drive to shut down.
  2. Turn ON the drive.
  3. Within about 3 seconds, flip the switch OFF again.
  4. Immediately turn it ON

If the light flashes quickly, the unit is resetting itself. Attempt to connect to the drive again after about 1 minute using the default username and password (by default, they are both admin.)