The LED indicators above the drive bays and the front LED indicate drive status and activity.
During Startup
- Front LED – blinks red/blue until both disks are powered on, then turns solid blue.
- Rear LEDs – blinks red/blue until corresponding disk is powered on, then turns solid blue.
NOTE: If the device is not able to initiate the boot process following disk startup, the front is solid red.
During Bootup
- Front LED – solid blue
- Rear LEDs – solid blue
NOTE: If a disk is failing, both the disk’s corresponding rear LED and the front LED will be solid red.
During RAID Synchronization
- Front LED – solid red
- Rear LEDs – The LED corresponding to the original disk will be blinking blue and the one being synchronized is blinking red
- Once both disks are synchronized, their corresponding rear LED and the front LED will be solid blue.