Frequently Asked QuestionsCan I leave my SCSI device powered off (or disconnect it) while the computer is on?No. All SCSI devices connected to the computer MUST be powered on while the computer is on. You want to turn on all SCSI devices before powering on the computer and leave the devices on until after you have done a proper shut down of the computer. Failure to run with SCSI devices powered on can cause the computer to not operate properly and may cause directory corruption. NOTE:Never connect or disconnect a SCSI device while the computer is powered on. You can cause hardware damage. Always power off the computer first and then power off all SCSI devices before connecting or disconnecting anything on the SCSI bus. 10056 |
|
